Parex Monogris E - 25kg

Parex Monogris E is a high performance polymer modified, weather resistant, grey base coat and finishing render for vertical external and internal walls. Suitable for equalising suction on mixed substrates and as a bonding base coat on to high or low suction substrates.  Suitable as a grey coat finishing render or as a base coat for receiving a Parex decorative finish. e.g. MONOREX GM & MONOREX GF, MONOBLANCO, REVLANE, CRYLANE. 

Suitable Substrate

Masonry and walls constructed from the following: 

• Ultra-lightweight, lightweight & dense aggregate concrete blocks.
  
• Bricks.
  
• Clay Blocks s e.g. Porotherm
  
• Standard low and normal density lightweight aircrete blocks.
  
• Breeze blocks (clinker).
  
• Stone/rubble stone.
  
• Shuttered concrete.
  
• Expanded clay insulation blocks
  
• Clean, sound, well adhered existing render. Base coats conforming to BS EN 13914-1 PAREX® grey weather resistant base coats, e.g. MONOGRIS E, PARMUREX
  
• Dry-stacked inter-locking modular wall units e.g. Durisol recycled timber blocks
  
• Below dpc applications and old substrates in accordance with BS8000 - 4 Code of Practice for Waterproofing - consult Sika for guidance.
  

Unsuitable Substrate 

• Mortar or plaster (Gypsum) coated construct
  
• Exposed vertical substrates with a backward incline more than 10 º from the vertical – A backward incline may affect water runoff and may have a tendency to hold moisture
  
• Painted substrates – Use PARINTER first.
  

Substrate Primer

Substrates must be clean, sound, dust free and free of any material which may prevent adhesion. Remove all traces of plaster, paint, etc. 

• Construction of the masonry must comply with BS 8000-3.
  
• On low suction e.g. concrete or high suction e.g. Lightweight aircrete or clay blocks, application may also be assisted with a coat of ready-to use MICRO GOBETIS 3000 or enhance the MONOGRIS E with 0.5 L of 751 LANKOLATEX to the mixing water volume for a 25 kg bag of MONOGRIS E.
  
• On wet or wet patchy substrates or where different materials have been used it is advisable to apply a key coat made up by exchanging 0.5 L of water for 0.5 L of 751 LANKOLATEX for the mixing volume for a 25 kg bag of MONOGRIS E. Allow the key coat to fully dry a minimum of 48 hours before the application of the next coat. This suggestion will assist against the effect of ‘block ghosting’ and shade variation
  
• TV10 MESH reinforcement mesh may also be required, dependent upon substrate condition and project specification
  

Coverage

Approx. 1.7kg per mm / per m2 

• Approx. 1.25-1.3 m² @ 15mm/25 kg bag floated smooth - Applied on Block & Brick
  
• Approx. 1.66-1.75 m² @ 10mm/25 kg bag floated smooth for decorative finish - Applied on base coat renders or concrete
  

Properties

Semi-lightweight render suitable for multiple substrates,  Excellent adhesion properties, Suitable for Hand or Spray Application. Water Demand : Approx. 5.4-6.3 Ltrs per 25 kg bag Water Absorption - W2 Reaction to fire - A1 Application Temperature - Dry frost free conditions 

Packaging

Parex Monogris E is supplied in 25kg bags. 

Technical & Safety Datasheets

Please follow link to Parex Monogris E technical datasheet. The link to Parex Monogris E safety datasheet is not available. 

Delivery